Expert Answers about Chevrolet RV Waste Valves
- How To Determine The Correct Replacement Waste Valve For 1999 Ford Catalina RV
- I would be happy to recommend a replacement waste valve for you, but unfortunately we do not have a break down of which style waste valve is used on a specific RV.
A few of the different styles are a single 3" waste valve like the Valterra Waste Valve for RV Black Water Tank - 3" Spigot to 3" Lug # T50A, or a combined black water and grey water valve like the Double RV Waste Valves - Sewer Wye - Rotating - 3" Spigot and 1-1/2" Hub # TR38A.
If you can send me a picture of your current...
view full answer... - Replacement Sewage Waste Valves In a 1999 Coachman
- Great question.
I can help you get what you need but I will need more information.
Unlike vehicles RVs are not at universal and variations are common place. The best way to find out is to take a picture of your current waste valve and send it in a reply to this email, then I can help find the right one.
The most common styles of waste valves are the following:
Double RV Waste Valves - Sanitation Tee - Rotating - 3" Hub and 1-1/2" Spigot # T18C.
Double RV Waste Valves - Sewer Wye -...
view full answer... - Difference Between 3 inch Hub and 3 inch Spigot for Doulbe RV Waste Valve Setups
- Basically the easiest way to describe it is that hubs fit over spigots. So the Double RV Waste Valves - Elbow - Rotating - 3 and 1.5 Hubs to 3 Lug Item # T80 that you referenced has a 3 inch fitting that is 3 inches in internal diameter designed for fitting over a 3 inch outer diameter (spigot) fitting.
These kits do not come apart so you'd have to replace the entire thing.
view full answer... - Availability of Replacement Seals for Valterra RV Waste Valves
- The correct replacement for a 2 inch valve is Valterra RV Waste Valve Seals - 2" # T1002-7VP, and the correct replacement for a 3 inch valve is Replacement Seals and Hardware for 3" Valterra Waste Valves # T1003-7VP.
view full answer... - Recommended Waste Valve Extension Rod for RV Black Water Valve
- On a waste valve, the handle is right to tighten and left to loosen. We have extension tubes with handles like the Valterra Waste Valve Extension Tube with Handle - 9" # TX9HPB in different lengths that allow you to open and close a threaded valve from a distance. I've attached a link to assist with your options and also linked a video of the Extension Rod Kit for Valterra Waste Valve - Adjustable - 6" to 8" and 9" to 11" # T1046-12VP.
We also have the pin type valves and cables for...
view full answer... - Recommended Replacement Drain Cover for Black/Grey RV Sewer Waste Valve
- It sounds like you might be looking for a waste valve cap. The Valterra RV Waste Valve Cap part # T1020 is a great cost effective option with seal and tether so you don't lose it. It's also available with a garden hose inlet for cleaning, the Valterra RV Waste Valve Cap part # T1020-1VP.
view full answer... - Replacement for Gray Water Waste
- What valve do you currently have on your RV? Most gray water tanks have a 1-1/2" valve. The Valterra Bladex Waste Valve Body for RV Gray Water Tank -with Aluminum Handle - 1-1/2" Diameter, # T1001VPM is a very cost effective replacement. This replaces the valve for your RV's gray-water tank, is 1-1/2" diameter passage. To install, remove the current waste valve and seals from your gray-water tank. Then place the included seals on the flange fittings and position the new valve body. Tighten...
view full answer... - Does the LaSalle Bristol Cable-Actuated RV Waste Valve Include the Hardware to Attach the Handle
- The LaSalle Bristol Cable-Actuated RV Waste Valve part # 34466N4BB72GM comes with everything that you need to attach it to the factory handle holding tab.
You will need to reuse the bolts that hold the valve in place in the waste pipe (or glue it in your current location) and the bracket that held you original handle in place. Everything else is provided. Generally it is easier to disassemble the valve body and place the new valve in the old parts attached to the sewer pipe.
view full answer... - Is There a Single Waste Valve with 1/2 Inch Hub and 3 Inch Bayonet Fittings
- I do have an option for you but the Valterra Waste Valve for RV Gray Water Tank part # T1001 is not offered with a 1/2" hub on one end and a 3" bayonet on the other end as this is not a common waste valve setup. The best option for you with this is mind is to combine the gray and black water tank valves with the Double RV Waste Valves part # T80. The combined gray and blank water tank valves are becoming very popular because they make emptying your tanks very easy. The black water should...
view full answer... - How to Merge Grey and Black Water Sewer Drains
- The setup you have with two waste valves is going to require the tanks to be drained one at a time as they do not make a wye drain hose or wye camlock fitting for the Waste Master RV Sewer Hose part # LC359724. Typically, the point at which the black and grey water tanks merge for draining occurs at the valve with a sewer wye like the Double RV Waste Valve part # T38.
I have attached a list of our sewer wye valves for you if you would like to change your setup so that the black and grey...
view full answer... - Replacement Bristol Double RV Waste Valves
- The Bristol Double RV Waste Valves, # 34466ND13AAR like most other waste valves in the industry, has a 3" hub to for black water waste and an 1-1/2" for the grey water. The main variances to consider when buying this or any waste valve is the construction and features. Does this valves shape/configuration meet the needs of what you are replacing or if retrofitting to a newer system will it match? Do the valve handles pull in the direction you need/want them to? and is the material it...
view full answer... - Waste Valve for Black Tank Will Open But Not Close with Handle
- It sounds like the linkage inside the waste valve might have become disconnected. I would first check to make sure the metal rod is tight inside the body and to the handle but aside from this I don't really have any repair procedures for this. If you can give me a bit more information as to what waste valve you have (make/model) I can call the manufacturer and see if they have any advice otherwise your best option would be to just replace the valve. For this we have the Valterra Bladex...
view full answer... - Improving Current Gray Water Waste Dump System
- If you have the Valterra Waste Valve for RV Gray Water Tank, # T1001C installed to your 1-1/2" sewer pipe and this valve is then attached to a Valterra gray water drain adapter, # T01-0091VP, then to a garden hose, yes, I can see that you are draining slower than optimal.
My suggestion is to first remove that Valterra adapter, # T01-0091VP. This is usually put in place for purpose of attaching a garden hose to the tank for the purpose tank cleanout, not draining. Use this connection...
view full answer... - Does Valterra 3 inch Waste Valve Fit 3 inch Bristol Hub
- The Valterra EZ Valve Electric Waste Valve System # E1003VP that you referenced is designed to fit standard RV waste setups that use 3 inch pipes like what a 3 inch Bristol hub is so yes, it would work.
view full answer... - Could Hepvo Waste Valve # 34433R450LES Connect to LaSalle Bristol RV Shower Drain # 34433R450LES
- Yes, a 1-1/4 inch Hepvo waste valve could attach to the LaSalle Bristol RV Shower Drain # 34433R450LES that you referenced.
view full answer... - Availability Of RV Waste Valve With 3" Bayonet Hooks And 3" Lugs
- We have exactly what you are looking for.
You will need the Valterra Waste Valve for RV Black Water Tank - Twist On - 3" Bayonet Hooks to 3" Lug # T58 which has a 3" bayonet hooks on one end and 3" Lugs on the other.
I included a video review of the # T58 for you to take a look at.
view full answer... - Sealant Recommendation for Installing Valterra ABS Solvent Cement part # A05-0303
- Are you using a sealant like the Valterra ABS Solvent Cement part # A05-0303 when installing the Valterra Motorhome Waste Valve # T80A.
view full answer... - Replacement Waste Valves for a 2014 Heartland Elkridge
- Yes, we have both economy and premium replacement valves for your 2014 Heartland Elkridge. However, in order to recommend options for you I would need to know what type of valves you have as well as their size. The most common is 3" for black water tanks and 1-1/2" for grey water tanks. In most cases there will be a wye in which the black and grey water outlet is combined but they can also be separate so I will need to know which you have.
If you just need a replacement economy valve body...
view full answer... - Recommended Replacement Double RV Waste Valve
- From the picture you provided, it does look like the Double RV Waste Valves - Sewer Wye - Rotating - 3" Spigot and 1-1/2" Spigot # TR38B will be the correct fit for you. However, I will say it is a good idea to measure the 2 pipes going into the valve to make sure they match the 1 1/2" and 3" ports.
view full answer... - How To Extend Handle On Bristol Waste Valve for RV Gray Water Tank
- Yes, the Extension Rod for LaSalle Bristol Waste Valve part # 34466SP1106 or part # 34466SP1112 can be added to the Bristol Waste Valve for RV Gray Water Tank part # 34466N11AB to extend the handle. If you need more than the above then you can just thread multiple onto one another to obtain the length you need. The handle will thread off, the extension will thread on, and the handle then threads back onto the extension.
view full answer...
Go To Results